Related Experiment Video
Updated: Aug 28, 2025

Quasi-light Storage for Optical Data Packets
Published on: February 6, 2014
Digitally assisted photonic analog domain self-interference cancellation for in-band full-duplex MIMO systems via the
Abstract:
A digitally assisted photonic analog domain self-interference cancellation (SIC) and frequency downconversion method is proposed for in-band full-duplex multiple-input multiple-output (MIMO) systems using the least square (LS) algorithm with adaptive order. The SIC and frequency downconversion are achieved in the optical domain via a dual-parallel Mach-Zehnder modulator, while the downconverted signal is processed by the LS algorithm with adaptive order that is used to track the response of the multipath self-interference (SI) channel and reconstruct the reference signal for SIC. The proposed method can overcome the reconstruction difficulty of the multipath analog reference signal for SIC with high complexity in the MIMO scenario and can also solve the problem that the order of the reference reconstruction algorithm is not optimized when the wireless environment changes. An experiment is carried out to verify the concept. SIC depths of 30.2, 26.9, 23.5, 19.5, and 15.8 dB are achieved when the SI signal has a carrier frequency of 10 GHz and baud rates of 0.1, 0.25, 0.5, 1, and 2 Gbaud, respectively. The convergence of the LS algorithm with adaptive order is also verified for different MIMO multipath SI signals.
Related Concept Videos
Linear Approximation in Time Domain
For a simple pendulum with a mass evenly distributed along its length and the center of mass located at half the pendulum's length,...
Linear Approximation in Frequency Domain
In contrast, nonlinear systems do not inherently possess these properties. However, for small deviations around an operating point, a nonlinear system can often be approximated as linear....
Reconstruction of Signal using Interpolation
Aliasing
If the sampling frequency is below the Nyquist rate, these replicas overlap, preventing the original...
Linear time-invariant Systems
The input-output behavior of an LTI system can be fully defined by its response to an impulsive excitation at its input. Once this impulse response is known, the system's reaction to any other input can be...
Upsampling

