Related Experiment Video
Updated: Aug 28, 2025

A Novel Inhalation Mask System to Deliver High Concentrations of Nitric Oxide Gas in Spontaneously Breathing Subjects
Published on: May 4, 2021
Implementing nitrous oxide cracking technology in the labour ward to reduce occupational exposure and environmental
A Pinder1,1, L Fang1,1, A Fieldhouse2
1North West School of Anaesthesia, Health Education England North West, Manchester, UK.
Abstract:
Nitrous oxide, a potent greenhouse gas, is a common labour analgesic. One method which may reduce its carbon footprint is to 'crack' the exhaled gas into nitrogen and oxygen using catalytic destruction. In this quality improvement project, based on environmental monitoring and staff feedback, we assessed the impact of nitrous oxide cracking technology in the maternity setting. Mean ambient nitrous oxide levels were recorded during the final 30 minutes of uncomplicated labour in 36 cases and plotted on a run chart. Interventions were implemented in four stages, comprising: stage 1, baseline (12 cases); stage 2, cracking with nitrous oxide delivered and scavenged via a mouthpiece (eight cases); stage 3, cracking with nitrous oxide via a facemask with an air-filled cushion (eight cases); stage 4, cracking with nitrous oxide via a low-profile facemask, and enhanced coaching on the use of the technology (eight cases). The median ambient nitrous oxide levels were 71% lower than baseline in stage 2 and 81% lower in stage 4. Staff feedback was generally positive, though some found the technology to be cumbersome; successful implementation relies on effective staff engagement. Our results indicate that cracking technology can reduce ambient nitrous oxide levels in the obstetric setting, with potential for reductions in environmental impacts and occupational exposure.
Related Concept Videos
Inhalational Anesthetics: Overview
2° Amines to N-Nitrosamines: Reaction with NaNO2
Oxygen Delivering System II: Venturi Mask and Transtracheal Oxygen
Venturi Mask
The Venturi mask, named after the Venturi effect, is designed to deliver precise oxygen concentrations. It consists of a large tube with an oxygen inlet that narrows down, causing a pressure drop that pulls air in through adjustable side ports. The mask is a lightweight,...
Administering Oxygen by Nasal Cannula
Nasal Cannulas
A nasal cannula is a lightweight tube split into two prongs placed in the nostrils,...
Administering Oxygen by Mask
Administering oxygen by mask is a common nursing intervention that provides supplemental oxygen to patients with respiratory distress or chronic lung conditions. This procedure involves delivering oxygen at a specified rate through a face mask connected to an oxygen source.
Equipment
The equipment necessary for this procedure includes:
Oxygen Delivering System I: Nasal Cannula and Face Mask
Nasal Cannula
A nasal cannula is a lightweight tube split at one end into two prongs and placed in the nostrils. It is typically used to deliver low to medium levels of oxygen.
Suggested flow rate: The suggested flow rate for a nasal cannula typically ranges between 1 and 6 L/min.
Oxygen percentage setting:...

