Related Experiment Video
Updated: Aug 28, 2025

Comparison of Scale in a Photosynthetic Reactor System for Algal Remediation of Wastewater
Published on: March 6, 2017
A pilot-scale study of the integrated phycoremediation-photolytic ozonation based municipal solid waste leachate
R Ricky1, S Shanthakumar2, K M Gothandam3
1Department of Environmental and Water Resources Engineering, School of Civil Engineering, Vellore Institute of Technology (VIT), Vellore-632014, India.
Abstract:
Municipal solid waste (MSW) leachate is a highly polluted liquid that accumulates in the landfill and contains a high concentration of toxic pollutants which can pollute the surrounding surface water and groundwater as well, if not treated properly. In this study, an integrated approach of phycoremediation with photolytic ozonation was employed for the leachate collected from the MSW dumpsite which has high Chemical Oxygen Demand (COD) and ammonium (NH4+) levels. Photolytic ozonation treatment was employed as a pre-treatment step under operating parameters of pH: 9.0; Ozone dosage: 5 g/h; UV-C: λ = 254 nm; and contact time: 60 min, in which the COD and NH4+ in the leachate was reduced up to 81% and 95%, respectively. The selected algae Chlorella vulgaris (C.vulgaris) was employed in a lab-scale study to optimize the inoculum conditions in the photolytic ozonated leachate (POL). The specific growth rate of C.vulgaris was observed as 0.14/d in the POL at the optimized condition (inoculum size of 25% (T25)) during the study period of 11 days. High-rate algal pond (HRAP) was employed for the pilot-scale study in controlled environmental conditions as in the T25 experimental run for the assessment of POL treatment and biomass production. C.vulgaris reduced the concentration of pollutants COD, NH4+, and heavy metals (Cu, Fe) in the POL up to 93%, 94%, and 71%, respectively, with the dry biomass productivity of 0.727 g/L/d which is 3 times higher than the biomass productivity of C.vulgaris in freshwater conditions. The biochemical composition (carbohydrates, proteins, and lipids) of the harvested biomass has higher lipid production with lipid productivity of 120 mg/L/d which can be used as a feedstock for the production of value-a dded products.
More Related Videos
09:49Use of a Battery of Chemical and Ecotoxicological Methods for the Assessment of the Efficacy of Wastewater Treatment Processes to Remove Estrogenic Potency
Published on: September 11, 2016
06:11Author Spotlight: Advancing Anaerobic Microbiota Research Using a Novel Respirometry Protocol
Published on: April 26, 2024
Related Concept Videos
Bioremediation
Environmental Applications of Microorganisms