Significantly improved cell affinity of polydimethylsiloxane enabled by a surface-modified strategy with chemical...

Polydimethylsiloxane (PDMS) is a commonly used insulation/packaging material for implantable neural electrodes. Nevertheless, the PDMS-initiated tissue response would lead to the deterioration of the electrode performances post-implantation, owing to its intrinsic hydrophobic and cell-repellent surface. The conventional physical coatings by hydrophilic hydrogels or bioactive molecules are unable to maintain during the long-term implantation due to their low stability by physical adhesion. In this work, we first anchor both hydrophilic polyethylene glycol (PEG) and bioactive molecule poly-L-lysine (PLL) on the PDMS surface by chemical coupling to change the PDMS surface from hydrophobic and cell-repellent to hydrophilic and cell-adhesive. XPS tests indicate the chemically coupled modification layers are stable on the PDMS surface after experiencing a harsh rinse process. Contact angle measurements show that the use of PEG 600 with the moderate molecular weight results in the highest hydrophilicity for the resulting PDMS-PEG-PLL. PC12 cell evaluation results exhibit that the PDMS-PEG-PLL with PEG 600 leads to significantly larger cell adhesion area, more neurite number, and longer neurite length than the PDMS. The PDMS-PEG-PLL with PEG 600 featuring stable modification layers, high hydrophilicity, and superior cell affinity has great potential in stabilizing the neural electrode-tissue interface for the long-term implantation. Graphical abstract.