Experimental and Numerical Studies on Fixed Steel Sheets Subjected to Underwater Explosion

This study presents underwater explosion tests with three different TNT charge weights to investigate the dynamic responses of a fixed steel sheet. A finite element model was established and benchmarked by comparing the bubble development and deformation distribution from the tests. The steel sheet shows a deformation process of hogging, sagging, and hogging again, due to the actions of shock waves, bubble expansion, bubble collapse, and bubble pulsation. The air may be sucked into the bubble during the hogging process, making the bubble collapse earlier and resulting in a relatively lower sagging deformation for large charge weights of TNT. The deformation caused by bubble pulsation is larger than that by the shock waves, owing to the large time duration of bubble pulsation. A parametric analysis was conducted to study the influence of steel grade, plate thickness, detonation distance, and the shape and position of charges on the dynamic behavior of steel plates subjected to underwater explosions. It shows that the damage to the steel plate gradually decreases, with the increase in steel strength, plate thickness, and detonation distance. The influence of the shape and position of charges is limited. The largest deformation is observed when the detonation distance increases to bubble radius.