Ultra-Wideband Power Amplifier Design Strategy for 5G Sub-6-GHz Applications

This paper presents a strategy to design ultrawideband power amplifiers with a fractional bandwidth of approximately 200%. It exploits a simple output matching network, which consists of a series transmission line together with a shunt stub, to compensate the output parasitic network of the device. Following this, a multisection transformer is implemented to obtain the optimal load at the intrinsic drain plane. As design examples, several output matching networks were designed for two different size GaN HEMT devices. One of these examples was implemented and characterized, and a drain efficiency from 52% to 70% and an output power between 40 dBm and 42.5 dBm were obtained, over 67% of the 5G sub-6-GHz band (i.e., 0.1 to 4 GHz). The aforementioned results, to the best of the authors' knowledge, represent the state of the art in broadband power amplifiers.