Related Experiment Video
Updated: Aug 27, 2025

Watershed Planning within a Quantitative Scenario Analysis Framework
Published on: July 24, 2016
In silico assessment of household level closed water cycles: Towards extreme decentralization
Arjen Van de Walle1,2, Elena Torfs2,3, Dorien Gaublomme2,3
1Center for Microbial Ecology and Technology, Ghent University, Coupure Links 653, 9000, Ghent, Belgium.
Abstract:
Water management in most of the developed world is currently practiced in a highly centralized manner, leading to major infrastructure and energy costs to transport water. To decrease the impacts of water scarcity and climate change, the decentralization of water can increase local robustness. In extremis, decentralization can involve building or house level water supply and treatment. Here, we constructed a MATLAB/Simulink model for two decentralized water management configurations at the household level, assuming the socio-environmental setting of Flanders, Belgium. Independence from the potable water grid and sewer system was pursued through rainwater harvesting, reuse of wastewater streams fit-for-purpose, and discharge via infiltration. The mass balance for water was calculated over the system boundaries showing high potential for independence from the grid with a reasonable treatment train and storage options. Next, the risk of contaminant accumulation within the circular system was assessed, showing a key limitation on decentralized system performance necessitating a system purge. Up to 59% of system rainwater usage was due to the replacement of this purge. Employing treatment units with high (95%) contaminant rejection efficiencies eliminated contaminant accumulation issues. The raw model output was quantitatively assessed by constructing four newly proposed key performance indicators (KPIs), quantifying system independence, circularity, drought tolerance and local water body recharge, which allowed for facilitated system comparison and communication to stakeholders. A sensitivity analysis was performed in which the effect of input parameter variability and uncertainty on system performance was quantified. The sensitivity analysis showed the importance of water recovery and contaminant removal efficiencies of the applied treatment technologies on system performance when contaminant accumulation in the system forms an issue. In systems not severely affected by pollutant accumulation, parameters such as inhabitant number and roof surface had the largest effect. As a whole, this work shows the potential of extreme decentralization of water systems and addresses the obstacle towards implementation formed by the accumulation of contaminants due to system circularity. Additionally, this study provides a framework for operational and technological decision support of decentralized household-scale water systems and, by extension, for future water policy-making.
Related Concept Videos
Design Example: Analyzing Capacity Contours for Flood Risk Assessment
Testing Water Quality
The Water Cycle
Disorder of Water Balance
Dehydration
Dehydration occurs when the body loses fluids (particularly water).
Causes:
The major causes of dehydration include excessive sweating, fever, vomiting, diarrhea, and diuresis.
Signs and Symptoms:
Symptoms primarily include intense...
Quality of Water
Design Example: Design of an Irrigation Channel

