Related Experiment Video
Updated: Aug 27, 2025

Comparison of Scale in a Photosynthetic Reactor System for Algal Remediation of Wastewater
Published on: March 6, 2017
The invasive Egeria densa macrophyte and its potential as a new renewable energy source: A study of degradation
Claudia Gonçalves de Azevedo1, Renivaldo José Dos Santos1, Carlos Toshiyuki Hiranobe1
1São Paulo State University (UNESP), Faculty of Engineering and Science, Department of Energy Engineering, Rosana, São Paulo 19274-000, Brazil.
Abstract:
The increase in global demand, along with environmental concerns, has led to the need for new sources that can supply the energy needed for socioeconomic development while reducing pollutant emissions. Aquatic biomasses, especially those of invasive aquatic macrophytes, can be potential energy sources, and this study evaluated the thermal degradation of the invasive Egeria densa macrophytes (EDM) in an inert environment at four heating rates to evaluate its potential as a low-cost biomass and bioenergy source. Pyrolysis experiments were performed using a thermogravimetric analyzer. The thermal profile of invasive EDM has three main events (multiple stages). Stages (i) and (ii) occur at a temperature range of 125-395 °C and represent the decomposition of carbohydrates such as hemicellulose and cellulose. Stage (iii) occurs between 395 and 500 °C and mainly relates to the decomposition of lignin. Thermal data have been used to analyze kinetic parameters through isoconversional methods, and the activation energy (Ea) value of EDM showed variation at different conversion points. The highest Ea values were observed for conversion rates of 0.3-0.6 due to the increased energy required to break down the lignocellulosic chains during decomposition. The small difference between the enthalpy change and Ea values for the different isoconversional methods can be due to a small potential energy barrier, which reflects the feasibility that the reaction can occur under the expected conditions. Gibbs free energy (137-145 kJ mol-1) and high heating value (13.40 MJ/kg) revealed a significant bioenergy potential for EDM biomass.
More Related Videos
10:08Construction and Setup of a Bench-scale Algal Photosynthetic Bioreactor with Temperature, Light, and pH Monitoring for Kinetic Growth Tests
Published on: June 14, 2017
05:21Operation of Laboratory Photobioreactors with Online Growth Measurements and Customizable Light Regimes
Published on: October 28, 2021
Related Concept Videos
Adaptations that Reduce Water Loss
Green Algae
Environmental Applications of Microorganisms