Related Experiment Video
Updated: Aug 27, 2025

Quantifying the Relative Thickness of Conductive Ferromagnetic Materials Using Detector Coil-Based Pulsed Eddy Current Sensors
Published on: January 16, 2020
Design and evaluation of magnetic field strength detection devices for millimeter-sized planar square inductors based
Lei Tian1, Limei Song2, Yu Zheng1
1School of Life Sciences, Tiangong University, 399 Binshui West Street, Xiqing District, Tianjin 300387, People's Republic of China.
Abstract:
Micro-magnetic stimulation is a research hotspot in the field of neuromodulation. However, it is difficult to measure the weak magnetic field produced by a millimeter-sized inductor. In this study, a mutual inductance model considering different positions and sizes was established for a common planar square spiral coil micro-magnetic stimulator. A physical model was simulated using the Comsol finite element method to verify the accuracy of the mutual inductance model. A weak magnetic field detection system was constructed using the TI AD8130 and NE5532 chips, and the magnetic field strengths of excitation micro-coils sized 3.612 × 3.612 and 5.55 × 5.55 mm2 were measured. The results show that when the size ratio of the detection coil (DC) to the excitation coil (EC) is under a specific ratio (DC:EC = 1:1, 2:1, 1.53:1,2.36:1), the measurement range of the magnetic field strength is in the range 0-3.06 mT with an error of 0.05 mT, and the frequency is in the range 1-120 kHz. The measurement accuracy rate reaches 97.62%. The results of this study have potential application in the measurement of the weak magnetic field.
Related Concept Videos
Mutual Inductance
When two circuits carrying time-varying currents are close to one another, the magnetic flux through each circuit varies because of the changing current in the other circuit. Consequently, an emf is induced in each circuit by the changing current in the other. Therefore, this type of emf is called...
Magnetic Field Due to Two Straight Wires
Magnetic Field Due To A Thin Straight Wire
Magnetic Field Of A Current Loop
Magnetic Force Between Two Parallel Currents
The force exerted by the magnetic field due to the first conductor over a finite length of the second conductor is given as the product of the current in the second conductor and the vector product of the length vector along the current element and the field due to the first conductor. According to the...
Induced Electric Fields: Applications

