Distributed temperature profile in hydrogen flame measured by telecom fiber and its durability under flame by OFDR

The distributed temperature profile of hydrogen flame based on optical frequency-domain reflectometry (OFDR) was experimentally demonstrated for the first time. Spatial temperature field at different flow rate of H₂ flame was monitored by OFDR via a telecom fiber (Corning SMF-28, CPC6) inside the flame over seconds, and the highest temperature is on the sides of center flame separated by ∼1.4mm with difference of 140∼190°C over the flame dimension of 2.5 mm above 900°C. Uniformity level of temperature is studied by varying the distance between fiber and tube entrance, and the largest uniform region over 1-millimeter length of fiber is obtained. Rayleigh scatters correlation coefficient decreases with temperature to 90% around 400°C, further reduces to 70% about 800°C, and 50% roughly at 1000°C. It indicates that a nonlinear thermal sensitivity of SMF is expected for temperature higher than 400°C with OFDR measurement. The durability of single-mode fiber under H₂ flame is studied via decorrelation time at various temperature. It maintains 20s at 880°C with correlation coefficient around 68% and drops to 50% decorrelation at 1000°C over 20s. This information is important for high temperature measurement using telecom fiber over 800°C based on OFDR. A maximum temperature of 1100°C was measured by OFDR, and it is possible for higher temperature measurement beyond of 1100°C with quicker system response time (<1s).