Interfacial silicon‑nitrogen aerogel raise flame retardancy of bamboo fiber reinforced polylactic acid composites

A triazine derivative containing nitrogen and silicon (SiN) was synthesized and the SiN hybrid aerogel was covered on the surface of bamboo fiber (BF). The modified BF was identified as MBF. The MBF and ammonium polyphosphate (APP) were used to regulate the flame retardancy and mechanical properties of polylactic acid (PLA). The PLA/BF composites were investigated using limiting oxygen index (LOI), UL-94 vertical combustion, cone calorimetry, thermogravimetric analysis linked with infrared spectra (TG-IR) etc. The char residue of MBF at 800 °C is as high as 43.5 % which is 200 % more than that of BF. Incorporating 9 wt% APP generates a PLA9 which displays the UL-94 V2 rating and a LOI value of 28.0 vol%. PLA9/MBF composites display the UL-94 V0 rating and increased LOI values while PLA9/BF composites obtain the UL-94 V2 rating and decreased LOI. The MBF reduces the release of flammable gases during combustion, enhances charring ability and decreases the thermal conductivity of composites. Besides, the tensile and impact strength of PLA9/20MBF is 20 % and 37 % more than that of PLA9/20BF due to stronger interfacial adhesion. This work provides a good method to regulate the flame retardancy and mechanical properties of PLA/BF composites.