Related Experiment Video
Updated: Aug 25, 2025

Processing Embryo, Eggshell, and Fungal Culture for Scanning Electron Microscopy
Published on: August 16, 2019
Interaction of Different Drying Methods and Storage on Appearance, Surface Structure, Energy, and Quality of Berberis
Seyede Laleh Talebzadeh1, Hamideh Fatemi1, Majid Azizi1
1Department of Horticultural Science, Agricultural Faculty, Ferdowsi University of Mashhad, Mashhad 9177948974, Iran.
Abstract:
Seedless barberry fruit is native small fruit in Iran. To examine the impact of various drying methods and storage on the biochemical attributes (Vitamin C, Anthocyanin, Phenol, pH, TA), color index (a*, b*, L*, ab, and Chroma), drying time, and fruit microstructure (by SEM) of seedless barberry (Berberis vulgaris var. asperma), and effective moisture diffusivity coefficient (Deff), specific energy consumption (SEC), energy efficiency (EE) of the dryers, this experiment was performed. Drying treatments include microwave (100, 170, and 270 W), oven (60 and 70 °C), cabinet (50 and 70 °C), shade, sun, and fresh samples (control) and storage 6 months after drying (in polyethylene packaging and at a temperature of 5-10 °C). Results showed minimum and maximum drying times (50 min and 696 h), were related to microwave (270 W) and shade methods, respectively. The highest color values were observed in fruits treated with control, shade and sun treatments and the lowest values were observed in cabinet (70 °C) methods. According to the SEM results, microwave significantly affected surface structure of the dried sample compared to others. The findings indicated that the use of artificial drying methods than natural methods (sun and shade) cause a more significant reduction in color indexes, while vitamin C, soluble solids, and anthocyanin were significantly maintained at a high level. Storage reduced anthocyanin content of fruits almost 12%. Moreover, it was discovered EE and SEC values varied in the range of 1.16-25.26% and 12.20-1182 MJ/kg, respectively. Deff values were higher in microwave 270 W.
More Related Videos
Related Concept Videos
Brick Durability, Strength, and Appearance
Porosity and Absorption of Aggregate
When all pores in an aggregate are filled with water, the aggregate is considered saturated and surface-dry. If left in dry air, water will evaporate until the...
Drying Shrinkage
A portion of this drying shrinkage can be reversed; if the concrete is...
Moisture Content and Bulking of Aggregate
When aggregates are exposed to rain or sit in stockpiles, they absorb moisture, which must be...
Seasoning of Wood
Achieving equilibrium moisture content is the goal of seasoning; this is the point where the wood's moisture content stabilizes to align with the moisture levels of the surrounding environment. Proper...
Adaptations that Reduce Water Loss

