Experimental Investigation of Cohesion between UHPC and NSC Utilising Interface Protrusions

The interaction of ultrahigh-performance concrete (UHPC) and normal-strength concrete (NSC) is one of the main issues for strengthening conventional concrete structures or other applications where NSC and UHPC are interrelated. UHPC stands out for its strength and durability, while NSC is significantly inexpensive and easier to work with. Efficiently designed structures can exploit the advantages of both mixtures. At the interface of these materials in newly designed structures, the formwork can be modified at the interface to give the concrete surface sufficient roughness and thus cohesion as required. This improves both the tensile and shear strength of the contact resulting in the enhanced capacity of the composite structure. In this study, a button foil was inserted into the formwork for the UHPC and then a part of NSC was made. The shear strength of the interface without any stress component in the transverse direction was measured on small-scale samples. It was to justify the possibility of the use of this interface in real constructions such as beams and columns. The main objective of further research is to design a composite beam using a UHPC shell as formwork for NSC and protrusions at the interface. It is expected that the U-shaped shell made of the UHPC could significantly contribute to the load-bearing capacity of the resulting composite NSC−UHPC structure and also to its enhanced durability. In addition, if the NSC is enclosed in a shell of UHPC, it can be made from various secondary materials, therefore it can decrease cement consumption by more than 50%.