Incorporation of Silica Particles Attached to Nylon 66 Electrospun Nanofibers with Cement

In this study, a modified version of electrospun nylon 66 nanofibers by silica particles were blended into ordinary Portland cement to investigate the microstructure and some mechanical properties of cementitious material. The addition of silica into the nanofibers improved the tensile and compressive properties of the hardened cement pastes. The observations from the mechanical strength tests showed an increase of 41%, 33% and 65% in tensile strength, compressive strength, and toughness, respectively, when modifying the cement pastes with the proposed nanofibers. The observations from scanning electron microscopy and transmission electron microscopy showed the morphology and microstructure of the fibers as well as their behaviors inside the cement matrix. Additionally, X-ray diffraction and thermal gravimetric analysis clarified the occurrence of the extra pozzolanic reaction, as well as the calcium hydroxide consumption by the attached silica inside the cement matrix. Finally, the observations from this study showed the successful fabrication of the modified nanofibers and the feasibility of improving the tensile and compressive behaviors of cement pastes using the proposed electrospun nanofibers.