Droplet Deposition Distribution Prediction Method for a Six-Rotor Plant Protection UAV Based on Inverse Distance...

The aim of this work is to establish a method for real-time calculating droplet deposition distribution of a six-rotor plant protection unmanned aerial vehicle (UAV). The numerical simulation of the airflow field was carried out using computational fluid dynamics (CFD). The airflow field distribution was obtained under seven flight speeds, six flight heights, and seven crosswind speeds. The relative error verified the accuracy of the numerical model within 12% between the spatial point wind speed test and the simulated value. The numerical simulation results showed that with the improvement of the UAV flight speed and the crosswind, the relative airflow produces a vortex in the downwash wind field below the UAV and reduces the stability of the downwash wind field. The discrete droplet phase was introduced in the flow field. The ground regions were divided using a small grid of 0.5 m × 0.5 m, and statistical calculations of droplet deposition rates within each grid yielded the distribution of droplets under 294 different parameter combinations. The statistical results show that the relative airflow and crosswind caused droplet convolution, and droplet drift was increased. In the actual operation of the UAV, the flight speed should be well controlled under the condition of low environmental wind to reduce the droplet drift rate and improve the utilization rate of pesticides. Based on the distribution under 294 different parameter combinations, one droplet deposition prediction method was established using inverse distance weighting (IDW). The proposed method lays a foundation for the cumulative calculation of droplet deposition distribution during continuous operation of plant protection UAV. It provides a basis for objectively evaluating the operational quality of plant protection UAVs and optimizing the setting of operation parameters.