Related Experiment Video
Updated: Aug 25, 2025

Dual-Dye Optical Mapping of Hearts from RyR2R2474S Knock-In Mice of Catecholaminergic Polymorphic Ventricular Tachycardia
Published on: December 22, 2023
Noncontact Sleeping Heartrate Monitoring Method Using Continuous-Wave Doppler Radar Based on the Difference Quadratic
1College of Optical Science and Engineering, Zhejiang University, Hangzhou 310027, China.
Abstract:
Continuous-wave doppler radar, which has the advantages of simple structure, low cost, and low power consumption, has attracted extensive attention in the detection of human vital signs. However, while respiration and heartbeat signals are mixed in the echo phase, the amplitude difference between the two signals is so large that it becomes difficult to measure the heartrate (HR) from the interference of respiration stably and accurately. In this paper, the difference quadratic sum demodulation method is proposed. According to the mixed characteristics of respiration and heartbeat after demodulation, the heartbeat features can be extracted with the help of the easy-to-detect breathing signal; combined with the constrained nearest neighbor search algorithm, it can realize sleeping HR monitoring overnight without body movements restraint. Considering the differences in vital-sign characteristics of different individuals and the irregularity of sleep movements, 54 h of sleep data for nine nights were collected from three subjects, and then compared with ECG-based HR reference equipment. After excluding the periods of body turning over, the HR error was within 10% for more than 70% of the time. Experiments confirmed that this method, as a tool for long-term HR monitoring, can play an important role in sleeping monitoring, smart elderly care, and smart homes.
Related Concept Videos
Pulse rhythm
Conversely, an irregular pulse pattern is termed dysrhythmia, stemming from disruptions in cardiac...
Assessing Blood pressure using a doppler ultrasound
Pre-Procedural Guidelines for Doppler Ultrasound Blood Pressure Assessment:
Preparation of Equipment:
Doppler Effect - II
Equipments Used To Measure Blood Pressure
This invasive approach involves cannulating a peripheral artery. During each cardiac contraction, pressure generates mechanical motion within the catheter, transmitted through rigid, fluid-filled tubing to a transducer. This transducer converts mechanical motion into electrical signals displayed as waveforms on a monitor. An automatic flushing system prevents blood backflow. Due to the potential risk of unexpected arterial blood loss, this method is primarily used in intensive...
Holter Monitor: 24-Hour Monitoring

