Optimization of the nonlinear crystal length for high-power single-frequency intracavity frequency-doubling lasers

We report a method of optimizing the nonlinear crystal length of the intracavity frequency-doubling laser, which is achieved by maximizing the output power of the frequency-doubling laser in the case of ensuring the single longitudinal mode (SLM) operation of the laser. The optimal length of the nonlinear crystal for an SLM oscillation of the intracavity frequency-doubling laser is firstly theoretically predicted by comparing the losses introduced by the nonlinear crystal with different lengths with that of ensuring the SLM operation of the laser. Then three nonlinear LiB₃O₅ (LBO) crystals with the length of 18, 20, and 22 mm are adopted to be the frequency-doubling components in the experiment. By recording the output power and monitoring the longitudinal mode structure of the laser, it is found that the nonlinear LBO crystal with the length of 20 mm is the best candidate, since the output power is higher than that of the LBO crystal with the length of 18 mm, and the SLM operation of the laser is readily achieved compared to that of the LBO crystal with the length of 22 mm. The experimental results well agree with the theoretical predictions. The current method can pave a good way to attain a single-frequency continuous-wave intracavity frequency-doubling laser.