Large dynamic strain range slope-assisted Brillouin optical time domain reflectometry based on a graded-index...

A slope-assisted Brillouin optical time domain reflectometry system with large dynamic strain range was proposed and demonstrated using graded-index multi-mode fiber (GI-MMF) as sensing fiber. Analysis of the simulated and experimental results indicated that the Brillouin gain spectrum in GI-MMF could be broadened by controlling the coupling efficiency of optical and acoustic modes. The coupling efficiency could be controlled by adjusting lateral offset between single mode fiber (SMF) and GI-MMF. The system realized the maximum strain dynamic measurement of 3000 µɛ with the spatial resolution of 5 m along ∼1 km GI-MMF, and exhibited significant linear relationship between signal intensity and strain at vibrational frequency of 7.83 and 15.47 Hz. The measured error of vibration frequency was less than 0.2 and 1.5 Hz, respectively. The measured strain range of this system was more than three times that of traditional systems based on SMF and could be achieved at relatively low cost.