30 W-average-power femtosecond NIR laser operating in a flexible GHz-burst-regime

Laser sources which produce GHz bursts of ultrashort pulses attract a lot of attention by demonstrating superior performance in material processing. Flexibility of the laser source in a selection of parameters for custom application is highly preferable. In this work, we demonstrate a very versatile method for burst formation using the active fiber loop (AFL). It allows forming GHz bursts containing from 2 up to approximately 2200 pulses in a burst (1000 ns burst width) with identical pulse separation and any predefined intra-burst pulse repetition rate (PRR). The burst pre-shaping by the amplification conditions in the AFL and by the modulation of transmission of the acousto-optic modulator was demonstrated. Industrial-grade ultrafast laser system was able to operate in the single-pulse and GHz-burst regimes. The laser system delivered high-quality 368 fs duration (FWHM) pulses of 15.3 µJ pulse energy and 30.6 W average output power at 2 MHz PRR in the single-pulse regime. In the GHz-burst operation regime, bursts of 2.2 GHz intra-burst repetition rate were formed and amplified to more than 30 W average output power with a burst energy up to 135 µJ at a burst repetition rate of 200 kHz. The sub-picosecond duration of pulses was obtained in the GHz-burst regime at different burst widths.