Antibiofouling Characteristics and Mechanisms in an Anammox Membrane Bioreactor Based on an Optimized Photocatalytic...

As an ecofriendly photocatalytic antifouling technology for membrane bioreactors (MBRs), photocatalytic optical fibers (POFs) can decrease the replacement cost of modified membranes and prevent the proliferation of photosynthetic bacteria caused by direct light illumination. Here, POFs were applied in situ in an anaerobic ammonium oxidation (anammox) MBR for membrane biofouling control. Compared with the control MBR without POFs treatment, the average fouling cycle of the POFs-loaded MBR was extended by 137%, and the energy consumption caused by membrane fouling was saved by 18%. In the antibiofouling process, ^•OH was the key photocatalytic reactive species. On the fouled POFs-loaded membranes, the membrane-adhered foulant was significantly decreased by photocatalytic degradation of the proteins, polysaccharides and humic substances in the microbial metabolites. The membrane-attached bacteria were inactivated by the POFs by the mechanisms of cell-membrane destruction and cell-membrane permeabilization, which caused bacterial necrosis and apoptosis, respectively. Moreover, the total nitrogen-removal efficiencies of the two MBRs were maintained at 85.3-90.4%, and the abundance of anammox bacteria increased from 21.3% to 46.2% during the 202 days of operation, indicating an efficient anammox process with excellent nitrogen-removal performance, biomass retention, and anammox bacteria enrichment. The systematic insights into the antibiofouling performance and mechanisms of POFs in anammox MBRs will promote application and development of membrane-filtration technology in wastewater treatment using environmentally friendly and energy-efficient antifouling strategies.