Development and validation of diffusion-controlled model for predicting polycyclic aromatic hydrocarbons from...

Investigating the release of organic pollutants from bricks made from solid waste is essential. Based on Fick's laws of diffusion, the diffusion model and diffusion-degradation model of polycyclic aromatic hydrocarbon (PAH) emission from the bricks were deduced. The degradation and 64-day emission of PAHs in solid bricks made of oil-based drill cuttings were observed experimentally. The emission and degradation characteristics of 14 PAHs were obtained and fitted with the diffusion and diffusion-degradation models. The emission of most of the PAHs from the bricks at the beginning was in good agreement with the diffusion model, except for benzo[a]anthracene, pyrene, benzo[b]fluoranthene, benzo[k]fluoranthene, and benzo[a]pyrene. However, the emission of PAHs after some time was significantly lower than the theoretical value of the diffusion model. Moreover, fitting with the diffusion-degradation model gave better results, indicating that a joint diffusion-degradation mechanism controlled the emission of PAHs. Therefore, the diffusion-degradation model can better predict the long-term emission of PAHs in bricks made of oil-based drill cuttings.