Related Experiment Video
Updated: Aug 24, 2025

Author Spotlight: Advancing Energy Solutions Using Nanocomposites as Processed Thermoelectric Materials
Published on: May 17, 2024
Hyperelastic Kevlar Nanofiber Aerogels as Robust Thermal Switches for Smart Thermal Management
Peiying Hu1,2, Jing Wang2, Peigen Zhang1
1Key Laboratory of Advanced Metallic Materials of Jiangsu Province, School of Materials Science and Engineering, Southeast University, Nanjing, 211189, P. R. China.
Abstract:
Aerogels, the lightest artificial solid materials characterized by low density and thermal conductivity, high porosity, and large specific surface area, have attracted increasing interest. Aerogels exhibit single-mode thermal insulation properties regardless of the surrounding temperature. In this study, hyperelastic Kevlar nanofiber aerogels (HEKAs) are designed and fabricated by a slow-proton-release-modulating gelation and thermoinduced crosslinking strategy. The method does not use crosslinking agents and endows the ultralow-density (4.7 mg cm-3 ) HEKAs with low thermal conductivity (0.029 W m-1 K-1 ), high porosity (99.75%), high thermal stability (550 °C), and increased compression resilience (80%) and fatigue resistance. Proofs of the concept of the HEKAs acting as on-off thermal switches are demonstrated through experiments and simulations. The thermal switches exhibit a rapid thermal response speed of 0.73 °C s-1 , high heat flux of 2044 J m-2 s-1 , and switching ratio of 7.5. Heat dissipation can be reversibly switched on/off more than fifty times owing to the hyperelasticity and fatigue resistance of the HEKAs. This study suggests a route to fulfill the hyperelasticity of highly porous aerogels and to tailor heat flux on-demand.
Related Concept Videos
Thermal Stress
Mechanism of heat transfer
Thermal expansion and Thermal stress: Problem Solving
To solve the problem, first, identify the known and unknown quantities. The initial length (L) of the bridge is 1275 m, the coefficient of linear expansion (α) for steel is 12 x 10-6/°C, and the change in...
Mechanisms of Heat Transfer II
Mechanisms of Heat Transfer
Conduction, accounting for approximately 3% of body heat loss at rest, is the process of exchanging heat between molecules of two materials in direct contact. This can result in both heat loss and gain. For instance, when the body is submerged in water, which conducts heat 20 times more effectively than air, it can either lose or gain significant...
Mechanisms of Heat Transfer I

