Methylene blue removal using raw and modified biomass Plumeria alba (white frangipani) in batch mode: isotherm,
Jahnabi Deka1, Hitesh Das2, Anmol Singh3
1Department of Chemistry, Gauhati University, Guwahati, 781014, Assam, India.
Abstract:
Hazardous dyes used in textile industries are considered high-risk pollutants to the environment. The raw as well as acid-treated Plumeria alba (white frangipani) leaf powder (WFLP and SWFLP) were used for the adsorption of methylene blue (MB) that is available in industrial wastewaters following the batch adsorption technique. The characterizations of adsorbents were done by FTIR, SEM, EDX, TGA, and zeta potential parameters. The adsorption was considered for the effects of temperature, initial dye concentration, solution pH, adsorbent dosage, and contact time. The experimental results obtained in the adsorption of MB were examined by nonlinear error functions like chi-square (χ2), ARE, and MPSD for three isotherm models: Langmuir, Freundlich, and Temkin. The maximum monolayer adsorption capacity, qmax (mg/g), was 45.45 mg/g for raw WFLP and 250 mg/g for SWFLP. The adsorbents fitted to the pseudo-second-order kinetic model (R2 = 0.99) using the experimental data of batch adsorption. The thermodynamic studies explained the spontaneity and nature of adsorption for raw and acid-treated adsorbents. The batch experimental results and characterizations of the adsorbents revealed that the selected adsorbents would be the best adsorbents for the removal of MB from the wastewater solution.
