Evaluation of shields and ventilation as a countermeasure to protect bus drivers from infection

We evaluated the deposition of droplets and droplet nuclei-generated by simulated coughing and talking from three points in a bus-on the driver's face and on surfaces around the driver (e.g., the steering wheel), based on whether countermeasures were taken, and assuming that an infected passenger was talking to the driver. When a shield, such as acrylic boards or polyvinyl chloride (PVC) sheets, was used as the countermeasure, the deposition of artificial droplets (>4 μm), emitted from beside or behind the driver, on his eyes, mouth, and cheeks reduced by two to three orders of magnitude or more. Deposition on the surfaces around the driver was also reduced following the use of shields. For artificial droplet nuclei (1.3 μm of polystyrene latex (PSL)) emitted from atomizers beside the driver, the operation of the ventilation fan (VF) and air conditioner (AC), and defroster (DEF) greatly reduced the driver's exposure, while the use of the shield did not. The infection risk of the driver was estimated through exposure to the virus via transfer to the mucosa via hands or surface-to-finger, direct adhesion on the mucosa, and direct inhalation of droplets and droplet nuclei. This is under the assumption that the droplets and droplet nuclei measured in this study are 40% the diameter of those after immediately leaving the mouth of the infected person and are constant regardless of particle size. When using the shield, total infection risk via droplet, airborne, and contact transmission was decreased by 75.0-99.8%. When the shield was not installed, the infection risk decreased by 9.74-48.7% with the operation of the VF, AC, and/or DEF.