Fault Diagnosis of Balancing Machine Based on ISSA-ELM
1School of Mechanical Engineering, Jiangsu University of Science and Technology, Zhenjiang 212013, China.
Abstract:
Balancing machine is a general equipment for dynamic balance verification of rotating parts, whether it breaks down or does not determine the accuracy of dynamic balance verification. In order to solve the problem of insufficient fault diagnosis accuracy of balancing machine, a fault diagnosis method of balancing machine based on the Improved Sparrow Search Algorithm (ISSA) optimized Extreme Learning Machine (ELM) was proposed. Firstly, iterative chaos mapping and Fuch chaos mapping were introduced to initialize the population and increase the population diversity. Secondly, the adaptive dynamic factor and Levy flight strategy were also introduced to update the individual positions and improve the model convergence speed. Finally, the fault feature vector was input to the ISSA-ELM model with the fault type as the output. The experiment showed that the fault diagnosis accuracy of ISSA-ELM is as high as 99.17%, which is 1.67%, 2.50%, 7.50%, and 17.50% higher than that of SSA-ELM, HHO-ELM, PSO-ELM, and ELM, respectively, further improving the prediction accuracy of the operation state of the balancing machine.
Related Concept Videos
Multimachine Stability
In analyzing the system, the nodal equations represent the relationship between bus voltages, machine voltages, and machine currents. The nodal equation is given by:
Three-Phase Short Circuit—Unloaded Synchronous Machine
This behavior occurs due to the magnetic flux produced by the short-circuit armature currents. Initially, these currents follow high-reluctance paths but eventually shift to...
Simplified Synchronous Machine Model
In this model, each generator is connected to a...
Machines: Problem Solving II
Machines: Problem Solving I
The toggle clamp system is a machine structure consisting of movable, pin-connected multi-force members that form a stabilized system to transmit forces. The...
Bus Impedance Matrix
In the first circuit, all machine voltage sources are short-circuited, leaving only the prefault voltage source at the fault location. The positive-sequence bus impedance matrix can be determined by solving the nodal equations,...


