Inhibition Effect of Hydrophobic Functional Organic Corrosion Inhibitor in Reinforced Concrete

Using an admixed organic corrosion inhibitor is one of the most efficient strategies to enhance the corrosion resistance and durability of reinforced concrete. However, traditional admixed organic corrosion inhibitors only increase the corrosion resistance of the embedded reinforcing steel, and the optimization effect on the pore structure and the impermeability of concrete is very limited. In this study, in order to evaluate the corrosion-inhibition effect of a novel hydrophobic functional organic corrosion inhibitor, the adsorption behavior of a hydrophobic functional organic corrosion inhibitor and its related effect on the electrochemical behavior of the reinforcing steel was investigated. In addition, this paper further discusses the effect of a hydrophobic functional organic corrosion inhibitor on pore structure and hydrophobic properties, as well as the impermeability of concrete. The results indicated that the hydrophobic functional organic corrosion inhibitor was effectively adsorbed on the surface of the steel bar, and the higher adsorption content was relevant to the higher inhibitor dosage. On one hand, the hydrophobic functional organic corrosion inhibitor exhibited both a pore-blocking effect and a hydrophobic effect on concrete, leading to a refined pore structure and reduced capillary water absorption amount; on the other hand, the hydrophobic functional organic corrosion inhibitor exhibited an excellent corrosion-inhibition effect on the reinforcement embedded in the concrete, presenting an inhibition efficiency higher than 90% with a concentration of 4 wt.%.