The Characteristic and Distribution of Shale Micro-Brittleness Based on Nanoindentation

Shale is a special kind of rock mass and it is particularly important to evaluate its brittleness for the extraction of gas and oil from nanoporous shale. The current brittleness studies are mostly macro-evaluation methods, and there is a lack of a micro-brittleness index that is based on nanoindentation tests. In this paper, nanoindentation tests are carried out on the surface of shale to obtain mechanical property, and then a novel micro-brittleness index is proposed. Drawing a heat map by meshing indentation, the distribution characteristics of the brittleness index for the surface of shale and the variation laws between the mineral and brittleness index are explored. The results showed that the dimensionless brittleness index involved parameters including indentation irreversible deformation, elastic modulus, hardness and fracture toughness. The micro-brittleness index of the shale ranged from 7.46 to 65.69, and the average brittleness index was 25.837. The brittleness index exhibited an obvious bimodal distribution and there was great heterogeneity on the surface of shale. The crack propagation channels were formed by connecting many indentation points on the shale surface with high brittleness. The total brittleness index of quartz minerals was high, but the cementation effect with different minerals was various. Although the general brittleness of clay was low, the high brittleness index phenomenon was also exhibited. Studying the micro-brittleness of shale provides a more detailed evaluation for the shale friability, which is used to determine the optimal shale oil and gas recovery regime.