Related Experiment Video

Updated: Aug 23, 2025

Mechanical Expansion of Steel Tubing as a Solution to Leaky Wellbores

Mechanical Expansion of Steel Tubing as a Solution to Leaky Wellbores

Published on: November 20, 2014

Numerical and Experimental Investigations of the Influence of Operation on the Technical Condition of Pressure

Przemyslaw Moczko¹, Michał Paduchowicz¹, Damian Pietrusiak¹

¹Department of Machine Design and Research, Faculty of Mechanical Engineering, Wroclaw University of Science and Technology, 50-370 Wroclaw, Poland.

Materials (Basel, Switzerland)

|October 27, 2022

Abstract:

The paper presents the issues related to the design and assessment of the technical condition as well as determination of the residual durability of pressure equipment. Based on a real a example, a liquid nitrogen spherical tank, we present the development and applicability of the method for assessment of the durability of the structure. In terms of the material itself, the authors analyze macroscale (structural) factors of the geometry of the real structure (by 3D scanning: material wear detection, deflections and deformations, etc.) and measured real operational loads to develop an integrated method, including material model and behavior in its operational condition, delivering a useful tool for macroscale structural analyses of the materials under complex load (mechanical, thermal, chemical, etc.). As a result, a detailed analysis of the tank is presented. The paper gives an idea of the method, its development, usefulness, and applicability of the presented approach by indication of the mutual influence of pressure vessel components (e.g., stubs, manholes) and operational loads, which may result in underestimating the strength and durability of the pressure vessels in the design process and during operation.

Keywords:

FEA fatigue calculations pressure vessels residual life estimation

More Related Videos

In Situ High Pressure Hydrogen Tribological Testing of Common Polymer Materials Used in the Hydrogen Delivery Infrastructure

In Situ High Pressure Hydrogen Tribological Testing of Common Polymer Materials Used in the Hydrogen Delivery Infrastructure

Published on: March 31, 2018

Protocol for Relative Hydrodynamic Assessment of Tri-leaflet Polymer Valves

Protocol for Relative Hydrodynamic Assessment of Tri-leaflet Polymer Valves

Published on: October 17, 2013

Related Concept Videos

Mechanical Characteristics of Steel

Mechanical Characteristics of Steel

The mechanical characteristics of steel are assessed through various tests that evaluate its strength, toughness, and flexibility. These tests include tension, torsion, impact, bending, and hardness assessments, each providing crucial information about steel's suitability for specific applications.
The tension test is fundamental for determining tensile strength. In this test, a steel specimen is stretched using a gripping device until it breaks. The data collected during this test are used...

Single Pipe Systems

Single Pipe Systems

In pipe flow analysis, problems are typically categorized into three types — Type I, Type II, and Type III — based on the known parameters and the desired outcome. Each type of problem addresses specific engineering requirements using fluid properties, pipe characteristics, and operational conditions.
In a Type I problem, fluid properties (density and viscosity), pipe characteristics (including diameter, length, and surface roughness), and the flow rate or average velocity are...

Static, Stagnation, Dynamic and Total Pressure

Static, Stagnation, Dynamic and Total Pressure

The concept of static, stagnation, dynamic, and total pressure is fundamental in fluid dynamics, often explained using Bernoulli's equation:

Correlation of Experimental Data

Correlation of Experimental Data

Dimensional analysis simplifies complex physical problems and guides experimental investigations, but it does not provide complete solutions. It identifies the dimensionless groups that influence a phenomenon, but experimental data is needed to establish the specific relationships and validate theoretical predictions.
For example, a spherical particle moving through a viscous fluid experiences drag. Dimensional analysis shows that the drag force depends on the particle's diameter, velocity,...

Major Losses in Pipes

Major Losses in Pipes

When a fluid flows through a pipe, it experiences energy losses due to frictional resistance along the pipe walls, known as major losses. These energy losses result in a pressure drop, which varies based on the flow conditions — whether laminar or turbulent — and the specific physical properties of the fluid and pipe.
Fluid flow can be classified as laminar or turbulent, primarily based on the Reynolds number. This dimensionless number reflects the relative influence of inertial to...

Vapor Pressure of Fluid

Vapor Pressure of Fluid

The vapor pressure of a fluid is a crucial concept in fluid mechanics, influencing phenomena such as boiling and cavitation. Vapor pressure refers to the pressure exerted by a vapor at a state of thermodynamic equilibrium with its corresponding liquid phase at a specific temperature. It represents the tendency of molecules to escape from the fluid surface into the vapor phase.
When a liquid is placed in a closed container with a small air space, and the space is evacuated, vapor molecules will...

Articles linked to this work by shared authors, journal, and citation graph.

The Durability Assessment Methodology of Power Engineering Equipment Under Thermo-Mechanical Fatigue Using the Example of the HR6W Alloy.

Materials (Basel, Switzerland)·2026

Dynamic NVH Numerical Analysis of Power Steering in the Presence of Lubricant in the System.

Materials (Basel, Switzerland)·2022

Accuracy Evaluation of Thermoelastic Stress Analysis with the Use of Experimental and Numerical Methods.

Materials (Basel, Switzerland)·2022

Impact of Temperature on Low-Cycle Fatigue Characteristics of the HR6W Alloy.

Materials (Basel, Switzerland)·2021

See all related articles