Comparison of Four Electrical Interfacing Circuits in Frequency Up-Conversion Piezoelectric Energy Harvesting

Efficiently scavenging piezoelectric vibration energy is attracting a lot of interest. One important type is the frequency up-conversion (FUC) energy harvester, in which a low-frequency beam (LFB) impacts a high-frequency beam (HFB). In this paper, four interface circuits, standard energy harvesting (SEH), self-powered synchronous electric charge extraction (SP-SECE), self-powered synchronized switch harvesting on inductor (SP-SSHI) and self-powered optimized SECE (SP-OSECE), are compared while rectifying the generated piezoelectric voltage. The efficiencies of the four circuits are firstly tested at constant displacement and further analyzed. Furthermore, the harvested power under FUC is tested for different electromechanical couplings and different load values. The results show that SP-OSECE performs best in the case of a weak coupling or low-load resistance, for which the maximum power can be 43% higher than that of SEH. As the coupling level increases, SP-SSHI becomes the most efficient circuit with a 31% higher maximum power compared to that of SEH. The reasons for the variations in each circuit with different coupling coefficients are also analyzed.