Related Experiment Video
Updated: Aug 23, 2025

Emission Spectroscopic Boundary Layer Investigation during Ablative Material Testing in Plasmatron
Published on: June 9, 2016
Theoretical Investigation of Fast Neutron and Gamma Radiation Properties of Polycarbonate-Bismuth Oxide Composites
1Physics Department, Faculty of Sciences, Imam Mohammad Ibn Saud Islamic University (IMSIU), Riyadh 13318, Saudi Arabia.
Abstract:
The gamma mass (µ) and linear (µ) attenuation coefficients of polycarbonate-bismuth oxide composites (PC-Bi2O3) with different bismuth oxide weight factors were investigated theoretically using EpiXS and a Monte Carlo simulation-based toolkit and Geant4 within an energy range between 0.1 and 2 MeV. The wide energy ranges of gamma rays and neutrons were chosen to cover as many applications as possible. The attenuation coefficients were then used to compute the half-value layers. The effective atomic numbers and effective electron densities of the studied samples obtained by EpiXS were compared as well. In order to further evaluate the shielding effectiveness of the studied samples, the thicknesses of all the investigated samples equivalent to 0.5 mm lead at a gamma energy of 511 keV were compared using a Geant4 code simulating a female numerical phantom with a gamma source placed facing the chest and a cylinder-shaped shield wrapped around the trunk area. The fast neutron removal cross sections of the investigated samples were studied to evaluate the effect of the weight factor of nanocomposites on the neutron shielding capabilities of the polymer as well.
More Related Videos
10:24Neutron Radiography and Computed Tomography of Biological Systems at the Oak Ridge National Laboratory's High Flux Isotope Reactor
Published on: May 7, 2021
06:28Visualization of Low-Level Gamma Radiation Sources Using a Low-Cost, High-Sensitivity, Omnidirectional Compton Camera
Published on: January 30, 2020