Analysis of the Influence of Production Method, Plastic Content on the Basic Performance of Waste Plastic Modified...

The sustainable reuse of waste plastic as an alternative construction material has numerous environmental and economic advantages. New opportunities to recycle waste plastic in asphalt for road construction would mitigate landfill issues and significantly reduce global carbon emissions. With a clear aim to contribute to a more efficient reuse of waste plastic, this paper reutilized two types of waste plastic (polypropylene (PP) and polyethylene (PE)) as asphalt modifiers to improve the performance of asphalt pavement as well as to achieve the purpose of sustainable recycling waste plastic. Therefore, the optimal preparation parameters of plastic-modified asphalt were recommended by the orthogonal test. Then, the dispersion and modification mechanisms of plastic particles in plastic-modified asphalt were further studied by Fourier Transform Infrared Spectroscopy (FTIR) and Thermogravimetric Differential Scanning Calorimetry (TG-DSC). The results show that the asphalt containing PP and PE shows better overall performance at high temperatures compared with the base asphalt. Furthermore, PE-modified asphalt and PP-modified asphalt exhibited optimal properties when prepared at 3000 rpm for 30 min at 170 °C. Moreover, the results of the expansion mechanism show that the main reaction process of plastic asphalt is a physical change. Finally, PP-modified asphalt and PE-modified asphalt generally perform well and are suitable for high-temperature areas. Consequentially, the results of this research promote the recycling of waste plastic, ultimately advocating the recycling of waste materials and environmental protection of pavement construction.