Mass Spectrometry Imaging Strategy for In Situ Quantification of Soot in Size-Segregated Air Samples

Soot, mainly derived from incomplete combustion of fossil fuel and biomass, exists ubiquitously in different environmental matrixes. To study the detrimental effects of soot on climate, air quality, and human health, accurate quantification of soot is an important prerequisite. However, until now, quantification of soot in environmental media, especially in carbonaceous media, is still very challenging. Here, we report a matrix-free laser desorption/ionization mass spectrometry (LDI-MS) method for in situ imaging of soot particles in size-segregated aerosol samples collected on filter membranes. A series of round-shaped sample spots in filter membranes were selected and subjected to MS imaging analysis, enabling direct in situ quantification of soot without solvent extraction or separation. Especially, the MS imaging with serial sample spots can overcome the problems of sweet-spot in LDI-MS and inhomogeneous distribution of soot in the filter membrane, thus greatly improving the precision of quantification. The limit of detection of soot was 4 ng/m² and the recovery was 84.4-126%. By using this method, we found that a higher soot content was present in larger-sized particulate matter than smaller-sized particles, suggesting that aerosol soot was mainly derived from primary emission sources. Furthermore, this method also shows the potential to analyze nitrate and sulfate species in PM_2.5. To the best of our knowledge, it is the first method capable of simultaneous analysis of inorganic salts and soot in air samples. It represents a novel strategy for in situ quantification of aerosol soot with the advantages of high specificity, high sensitivity, separation-, solvent- and matrix-free.