Related Experiment Video
Updated: Aug 23, 2025

A Polymer-based Piezoelectric Vibration Energy Harvester with a 3D Meshed-Core Structure
Published on: February 20, 2019
Kármán Vortex Street Driven Membrane Triboelectric Nanogenerator for Enhanced Ultra-Low Speed Wind Energy Harvesting
Wenjian Li1, Liqiang Lu1, Xianpeng Fu2
1Department of Advanced Production Engineering, Engineering and Technology Institute Groningen, Faculty of Science and Engineering, University of Groningen, Nijenborgh 4, 9747 AGGroningen, The Netherlands.
Abstract:
Wind energy harvesting and sensing have a huge prospect in constructing self-powered sensor nodes, but the energy transducing efficiency at low and ultra-low wind speeds is still limited. Herein, we proposed a Kármán vortex street driven membrane triboelectric nanogenerator (KVSM-TENG) for ultra-low speed wind energy harvesting and flow sensing. By introducing Kármán vortex in the KVSM-TENG, the cut-in wind speed of the KVSM-TENG decreased from 1 to 0.52 m/s that is the lowest cut-in wind speed in current TENGs. The instantaneous output density of the KVSM-TENG significantly increased by 1000 times and 2.65 times at the inlet wind speeds of 1 and 2 m/s, respectively. In addition, with the excellent energy transducing performance at the ultra-low speed range, the KVSM-TENG was successfully demonstrated to detect a weak leakage of gas pipeline (∼0.6 m/s) for alarming with high sensitivity. The interaction mechanism between the vortex and KVSM-TENG was systematically investigated. Through the simulation and experimental validation, the enhancement mechanism of vortex dependence on the cylinder diameter and placement location of KVSM-TENG was investigated in detail. The influence of parameters such as membrane length, width, thickness, and electrode gap on the performance of the KVSM-TENG was systematically studied. This work not only provided an ingenious strategy for ultra-low speed wind energy harvesting but also demonstrates the promising prospects for monitoring the air flow in the natural gas exploitation and transportation.
More Related Videos
08:32Assembly and Characterization of an External Driver for the Generation of Sub-Kilohertz Oscillatory Flow in Microchannels
Published on: January 28, 2022
10:39Preparation of ZnO Nanorod/Graphene/ZnO Nanorod Epitaxial Double Heterostructure for Piezoelectrical Nanogenerator by Using Preheating Hydrothermal
Published on: January 15, 2016
Related Concept Videos
Wind Turbine Machine Models
Induction machines interact through the rotating magnetic field generated by the stator and the rotor. The key parameter is slip, which is the difference between synchronous speed and rotor speed relative to synchronous speed. Slip is...
Faraday Disk Dynamo
Torque On A Current Loop In A Magnetic Field
Consider a rectangular current-carrying loop containing N turns of wire, placed in a uniform magnetic field. The net force on a current-carrying loop...
Magnetic Damping
If, however, the bob is a slotted metal plate, the magnet produces a much smaller effect. When a slotted metal plate enters the field, an emf is induced by the change in flux; however, it is less effective because the slots limit the...
Steady, Laminar Flow Between Parallel Plates
Couette Flow