Experimental study on FBG sensing technology-based stress monitoring at the corners of reinforced soil retaining...

As a unique type of flexible slope fill-retaining structure, reinforced soil-retaining walls have the advantages of convenient construction, broad application conditions, good seismic performance, and high economic benefits. In general, reinforced soil-retaining walls appear at corners due to the restriction in topographic conditions during engineering construction. However, their special structures and stress conditions are usually ignored, thus triggering panel bulging, cracking, and collapse. In this study, an experimental method based on fiber Bragg grating (FBG) sensing technology was proposed for a physical model of reinforced soil-retaining walls. Then, a uniformly distributed load experiment was performed on this model by combining the measurement advantages of intelligent wire-type soil pressure sensors and the flexible characteristics of geotechnical reinforcement materials. The deformation development of this reinforced soil-retaining wall was monitored. Results revealed that before and after the loading of the reinforced soil-retaining wall, the deformation was mainly concentrated above the retaining wall, and the deformation scale at the corners was larger than that in the bilateral linear parts. After loading, the largest force deformation area on the retaining wall was transferred from the corners to the load area. The maximum strain was right beneath the load above the retaining wall, and the peak value at the other layers gradually approached the retaining wall. The experimental results prove that FBG sensing technology is feasible and effective for the whole-process monitoring of reinforced soil-retaining walls and is thus worthy of popularization and application.