Improved performance of stretchable piezoelectric energy harvester based on stress rearrangement

With the development of wearable devices and soft electronics, the demand for stretchable piezoelectric energy harvesters (SPEHs) has increased. Energy harvesting can provide energy when large batteries or power sources cannot be employed, and stretchability provides a user-friendly experience. However, the performance of SPEHs remains low, which limits their application. In this study, a wearable SPEH is developed by adopting a kirigami structure on a polyvinylidene fluoride film. The performance of the SPEH is improved by rearranging the stress distribution throughout the film. This is conducted using two approaches: topological depolarization, which eliminates the opposite charge generation by thermal treatment, and optimization of the neutral axis, which maximizes the stress applied at the surface of the piezoelectric film. The SPEH performance is experimentally measured and compared with that of existing SPEHs. Using these two approaches, the stress was rearranged in both the x-y plane and z-direction, and the output voltage increased by 21.57% compared with that of the original film with the same stretching motion. The generated energy harvester was successfully applied to smart transmittance-changing contact lenses.