Related Experiment Video
Updated: Aug 22, 2025

Implementation of Portable Emissions Measurement Systems PEMS for the Real-driving Emissions RDE Regulation in Europe
Published on: December 4, 2016
Environmental Management from the Point of View of the Energy Intensity of Road Freight Transport and Shocks
Elżbieta Szaruga1, Elżbieta Załoga1
1Department of Transport Management, Institute of Management, University of Szczecin, Cukrowa 8 Street, 71-004 Szczecin, Poland.
Abstract:
The research aimed to identify the directions of rationalization of the energy intensity of road freight transport in the context of the long-term balance of the drifting economy. The study was related to the case of Poland, and its scope spans 8.5 years. The long-term drift of the economy and shocks from the production process of the construction, industry, and processing sectors were taken into account in the research. In addition, the structural shocks were decomposed and validated. Twenty-one statistically significant multidirectional and varying relationships between the energy consumption of road transport and production in the construction, industry, and processing sectors were confirmed, including 7 long-term and 14 immediate relationships. The leakage of shocks in production has been demonstrated in the construction, industry, and processing sectors. The shock from the construction sector lowered the energy consumption of road transport in the long run. The greatest impact of the shock occurred only after 6-12 months and slowly stabilized after approximately 24 months. On the other hand, the shock in production in the industry and processing sectors reduced energy intensity in the short term but increased in the long term. The shocks in the industry and processing sectors transformed relatively quickly.
Related Concept Videos
Impact Loading
In cases of elastic deformation,...
Short-distance Transport of Resources
Energy Considerations in Open Channel Flow
Energy to Drive Translocation
Generally, polypeptides are unfolded by two distinct...
Distributed Loads
For example, consider a bookshelf filled with books stacked vertically adjacent to each other. The weight of the books is evenly distributed over the length of the shelf. As a result, the pressure at different locations on the surface of the...
Strain-Energy Density
In the elastic region of a material, the relationship between the stress and the strain is linear and follows Hooke's Law. The strain energy density in this...

