Concept of Sustainable Demolition Process for Brickwork Buildings with Expanded Polystyrene Foam Insulation Using...

The traditional demolition process for brickwork buildings results in a significant volume of mixed debris. The debris consists of ceramic bricks (and other wall elements), mortar, thermal insulation (usually expanded polystyrene or rockwool), smaller steel elements, pieces of wood, and glass. Such mixed debris is difficult to recycle. Separating thermal insulation that is "glued" by cement mortar to brickwork is probably the most difficult and time-consuming task in processing mixed debris. This task can be performed in a very different and fully "automatized" manner using Tenebrio molitor mealworms. The mealworms remove expanded polystyrene from brickwork surfaces and transform it into frass. In the paper, a research program aiming to prove the concept of using the mealworms of Tenebrio molitor for processing mixed debris is presented. The tests were conducted using two models of a three-layered brickwork wall, which is very common in Europe. The proposed approached was successful. Both types of used expanded polystyrene foam (EPS) were fully removed from multilayer wall specimens. The possibilities and limitations of the proposed processing method were discussed and analyzed. The conducted research proved that it is feasible to clean brickwork debris from the EPS using Tenebrio molitor mealworms. Differences in the speed of cleaning process regarding the type of EPS were noted. More research is needed to scale the process, and to find the best method for using frass. By using Tenebrio molitor mealworms, one can make the demolition process much cleaner.