Related Experiment Video
Updated: Aug 22, 2025

Three-Dimensionally Printed Microfluidic Cross-flow System for Ultrafiltration/Nanofiltration Membrane Performance Testing
Published on: February 13, 2016
Reduced Low-Pressure Membrane Fouling by Inline Coagulation Pretreatment for a Colored River Water
Joseph D Ladouceur1, Roberto M Narbaitz1
1Department of Civil Engineering, University of Ottawa, Ottawa, ON K1N 6N5, Canada.
Abstract:
Drinking water treatment (DWT) using low-pressure membranes (LPM) has become increasingly popular due to their many reported advantages compared to conventional technologies. Productivity decline due to fouling has prevented LPMs from becoming the technology of choice in DWT, however, coagulation pretreatment either with or without particle separation mitigates fouling phenomena. The effectiveness of coagulation/flocculation/sedimentation (CF-S), coagulation/flocculation/dissolved air flotation (CF-DAF), and inline coagulation (CF-IN) as technologies for pretreatment of feed water has rarely been investigated using the same water source. In this study, CF-S, CF-DAF, and CF-IN are directly compared as pretreatment of a tubular multi-channeled ultrafiltration (UF) membrane using the same highly colored river water. Three-day long filtration tests were performed using an automated bench-scale filtration apparatus with an inside-out configuration. Although CF-DAF had the greatest removal of dissolved organic matter (DOM) and hydrophobic organics, CF-S pretreatment resulted in a similar level of total fouling. Compared to CF-DAF and CF-S, CF-IN pretreatment resulted in lower fouling. The hydraulic and chemical reversibility of CF-IN fouling was seen to be strongly influenced by the feed water zeta potential, suggesting the importance of floc electrostatic and morphological characteristics on inline coagulation performance.
Related Concept Videos
Coagulation
Factors Affecting Solubility
Colloidal precipitates
Precipitation and Co-precipitation

