Related Experiment Video
Updated: Jul 19, 2026

Three-Dimensionally Printed Microfluidic Cross-flow System for Ultrafiltration/Nanofiltration Membrane Performance Testing
Published on: February 13, 2016
Fouling Analysis in One-Stage Ultrafiltration of Precipitation-Treated Bacillus subtilis Fermentation Liquors for
Mai Lien Tran1, Ying-Shr Chen2, Ruey-Shin Juang2,3,4
1Institute of Environmental Science, Engineering and Management, Industrial University of Ho Chi Minh City, Ho Chi Minh City 700000, Vietnam.
Abstract:
Primary recovery of surfactin from precipitation-pretreated fermentation broths of Bacillus subtilis ATCC 21332 culture by one-stage dead-end and cross-flow ultrafiltration (UF) was studied. Dead-end experiments were first performed to select suitable conditions, including the amount of added ethanol-a micelle-destabilizing solvent (0-70 vol%), type (polyethersulfone, polyacrylonitrile, poly(vinylidene fluoride)) and molecular-weight cut-off (MWCO, 30-100 kDa) of the membrane in the surfactin concentration range of 0.25-1.23 g/L. Then, the cross-flow UF experiments were conducted to check the recovery performance in the ranges of feed surfactin concentration of 1.13-2.67 g/L, flow velocity of 0.025-0.05 m/s, and transmembrane pressure of 40-100 kPa. The Hermia model was also used to clarify membrane fouling mechanisms. Finally, three cleaning agents and two in situ cleaning ways (flush and back-flush) were selected to regain the permeate flux. As for the primary recovery of surfactin from the permeate in cross-flow UF, a polyethersulfone membrane with 100-kDa MWCO was suggested, and the NaOH solution at pH 11 was used for membrane flushing.
Related Concept Videos
Biological Treatment of Effluent and Waste Water
Downstream Processing

