Related Experiment Video

Updated: Aug 22, 2025

A Soft Tooling Process Chain for Injection Molding of a 3D Component with Micro Pillars
05:32

A Soft Tooling Process Chain for Injection Molding of a 3D Component with Micro Pillars

Published on: August 4, 2018

12.7K

New Approach for Extrusion Additive Manufacturing of Soft and Elastic Articles from Liquid-PVC-Based Consumable

Bohdan Savchenko1, Nadiya Sova1, Victor Beloshenko2

  • 1Department of Applied Ecology, Technology of Polymers and Chemical Fibers, Kyiv National University of Technologies and Design, NemirovichaDanchenko Street, 2, 01011 Kyiv, Ukraine.

Polymers
|November 11, 2022
PubMed

Keywords:
additive manufacturingliquid consumablemechanical propertiespolyvinyl chloride plastisolsoft and ductile articles

More Related Videos

Rapid Manufacturing of Thin Soft Pneumatic Actuators and Robots08:47

Rapid Manufacturing of Thin Soft Pneumatic Actuators and Robots

Published on: November 8, 2019

7.7K
Film Extrusion of Crambe abyssinica/Wheat Gluten Blends06:51

Film Extrusion of Crambe abyssinica/Wheat Gluten Blends

Published on: January 17, 2017

10.1K

Related Concept Videos

Plasticizers01:31

Plasticizers

Water-reducers, or plasticizers, are chemical admixtures used in concrete to improve strength and workability. These additives reduce the water-cement ratio without compromising workability, lower the cement content while maintaining the same workability, or increase workability to assist concrete placement in inaccessible areas.
Plasticizers function by using surface-active agents to create repulsive electrostatic forces between cement particles. This dispersion enhances the concrete's...
107
Types of Step-Growth Polymers: Polyesters01:20

Types of Step-Growth Polymers: Polyesters

The introduction of polyesters has brought major development to the textile industry. The wrinkle-free behavior of polyester blends has eliminated the need for starching and ironing clothes.
Polyesters are commonly prepared from terephthalic acid and ethylene glycol; the crude product is known as poly(ethylene terephthalate) or PET. However, polyesters are synthesized industrially by transesterification of dimethyl terephthalate with ethylene glycol at 150 °C. The two reactants and the...
2.3K
Superplasticizers01:30

Superplasticizers

Superplasticizers are advanced admixtures that enhance the workability of concrete by lowering the water content without compromising the strength of the material. These substances are highly effective water reducers, improving concrete flow, making it easier to work with, and enabling concrete to reach inaccessible areas or densely reinforced sections without mechanical vibration. The key components in superplasticizers are either sulfonated melamine or naphthalene formaldehyde condensates,...
111