Construction of an Electrical Conductor, Strain Sensor, Electrical Connection and Cycle Switch Using Conductive...

Researchers in science and industry are increasingly interested in conductive textiles. In this article, we have successfully prepared conductive textiles by applying a graphite dispersion to cotton fabric using a simple brush-coating-drying method and the solvents of dimethyl sulfoxide, dimethyl formamide, and a solvent mixture of both. The sheet resistance of the resulting cotton fabrics could be influenced by the type of polar solvent used to prepare the graphite dispersion and the concentration of graphite. In addition, the graphite cotton fabrics showed semiconductive behavior upon studying the resistance at different temperatures. A flexible strain sensor was fabricated using these graphite cotton fabrics for human motion detection. Most importantly, the resulting strain sensor functions even after 100 bending cycles, indicating its excellent reproducibility. In addition, our results have also shown that these graphite cotton fabrics can be used as electrical interconnects in electrical circuits without any visible degradation of the conductive cotton. Finally, a cotton electrical cycle switch was made using the graphite cotton fabrics and worked in the on and off state.