Large-aperture, widely and linearly tunable, electromagnetically actuated MEMS Fabry-Perot filtering chips for...

Longwave infrared spectral imaging (LWIR-SI) has potential in many important civilian and military fields. However, conventional LWIR-SI systems based on traditional dispersion elements always suffer the problems of high cost, large volume and complicated system structure. Micro-electro-mechanical systems Fabry-Perot filtering chips (MEMS-FPFC) give a feasible way for realizing miniaturized, low cost and customizable LWIR-SI systems. The LWIR MEMS-FPFC ever reported can't meet the demands of the next-generation LWIR-SI systems, due to the limitation of small aperture size and nonlinear actuation. In this work, we propose a large-aperture, widely and linearly tunable electromagnetically actuated MEMS-FPFC for LWIR-SI. A multi-field coupling simulation model is built and the wafer-scale bulk-micromachining process is applied to realize the design and fabrication of the proposed MEMS-FPFC. Finally, with the rational structural design and fabrication process, the filtering chip after packaging has an aperture size of 10 mm, which is the largest aperture size of LWIR MEMS-FPFC ever reported. The fabricated electromagnetically actuated MEMS-FPFC can be tuned continuously across the entire LWIR range of 8.39-12.95 µm under ±100 mA driving current with a pretty good linear response of better than 98%. The developed electromagnetically actuated MEMS-FPFC can be directly used for constructing miniaturized LWIR-SI systems, aiming for such applications as military surveillance, gas sensing, and industry monitoring.