Related Experiment Video
Updated: Aug 21, 2025

A Uniaxial Compression Experiment with CO2-Bearing Coal Using a Visualized and Constant-Volume Gas-Solid Coupling Test System
Published on: June 12, 2019
Accessibility and effects of binder types on the physical and energetic properties of ecological coal
Kodji Ezéchiel1, Tize Koda Joel2, Awono Abdon3
1Department of Environmental Science, National Advanced School of Engineering, University of Maroua, Cameroon.
Abstract:
The objective of this paper was to determine the effects of binders on the physical and energetic properties of briquettes as well as their accessibility. Proximate analysis and investigation on binder cost on local market were conducted. The results show that the addition of binder increases the durability and density, but decreases the LHV of briquettes. However, when the LHV of the binder is higher than that of the biomass used for briquette making, the LHV will increase. Among the binders used, cassava starch contains more LHV (19.082 ± 0.381 MJ/kg), followed by cow dung (17.088 ± 0.274 MJ/kg), arabic gum (16.015 ± 0.631 MJ/kg), bark of Grewia bicolor comes last with 14.020 ± 0.272 MJ/kg, and black clay does not contain energy. For a piece of briquette which weighs 20 g, bark of G. bicolor gives a better hardness with a crushing limit load of 22 kg, followed by arabic gum with 19.5 kg, and cow dung with 14 kg. Similarly, bark of G. bicolor gives the higher density, followed by arabic gum. A kg of gum arabic, G. bicolor and starch costs between US$ 1.60 and 3.17. It is important to afforest the plant species that produce binders.
More Related Videos
09:39Physical, Chemical and Biological Characterization of Six Biochars Produced for the Remediation of Contaminated Sites
Published on: November 28, 2014
08:52Method to Produce Durable Pellets at Lower Energy Consumption Using High Moisture Corn Stover and a Corn Starch Binder in a Flat Die Pellet Mill
Published on: June 15, 2016
Related Concept Videos
Bonding and Strength of Aggregate
The Equilibrium Binding Constant and Binding Strength
Combustion Energy: A Measure of Stability in Alkanes and Cycloalkanes
Alkanes undergo combustion in the presence of excess oxygen and high-temperature conditions to give carbon dioxide and water. A combustion reaction is the energy source in natural gas, liquified...
Factors Affecting Activity Coefficient
The activity coefficient value for an ion is close to one when the solution has almost zero ionic strength, i.e., when the solution shows close to ideal behavior. As the ionic strength of the solution increases from 0 to 0.1 mol/L, a...
Porosity and Absorption of Aggregate
When all pores in an aggregate are filled with water, the aggregate is considered saturated and surface-dry. If left in dry air, water will evaporate until the...
Ecological Disturbance