Related Experiment Video
Updated: Aug 20, 2025

A CO2 Concentration Gradient Facility for Testing CO2 Enrichment and Soil Effects on Grassland Ecosystem Function
Published on: November 21, 2015
Effects of vertical greenery systems on the spatiotemporal thermal environment in street canyons with different
Xiaona Zheng1, Wentao Hu1, Shuang Luo1
1College of Forestry and Landscape Architecture, South China Agricultural University, Guangzhou 510642, China.
Abstract:
Many studies have focused mainly on the thermal and energy performance of VGSs on a building scale; however, little is known about the cooling effect of VGSs in street canyons and its response to different aspect ratios (building height/street width, H/W). Therefore, a scaled outdoor experiment was conducted to investigate the spatiotemporal variation of the urban wind and thermal environment caused by west-facing vertical greenery systems (VGSs) in street canyons with H/W = 1 and 2 in the subtropical city of Guangzhou, China. On a typical hot day (26th Oct. 2021), VGSs reduced wind speed by 38.0 % and 21.0 % in street canyons with H/W = 1 and 2, respectively. Compared with the reference cases, the temperature regimes of VGS cases (H/W = 1 and 2), including west-facing wall temperature (Tw-west), east-facing wall temperature (Tw-east), ground temperature (Tg), and air temperature (Ta), were all significantly decreased. Because of the cooling effect of VGSs, the maximum reduction of Tw-west in the upper level of street canyons with H/W = 1 and 2 was 20.3 and 16.8 °C, respectively. The maximum reduction of Tg in the center of the VGS case with H/W = 2 was 4.6 °C, which was more pronounced than in the VGS case with H/W = 1 (1.8 °C). The maximum reduction of Ta at the pedestrian level along the central axis of street canyons with H/W = 1 and 2 was 0.8 and 1.6 °C, respectively, which was more pronounced than at the upper level. The reduction of Tw-west in the upper level and of Tg and Ta in the VGS case with H/W = 2 was greater than that in the VGS case with H/W = 1 due to lower wind speed and albedo.
Related Concept Videos
Thermal Insulation in Masonry Walls
External insulation can be applied using an Exterior Insulation and Finish System (EIFS), which involves affixing panels of plastic foam to the wall and covering them with a polymeric stucco reinforced with glass fiber mesh....
Masonry in Cold and Hot Weather Conditions
Other key practices include keeping masonry units...
Design Example: Sustainability in Concrete Building
There are multiple approaches to achieve sustainability in a commercial concrete building. For instance, construct a concrete parking area under the building, utilizing pervious concrete paver blocks in open areas to facilitate rainwater collection through an underground...
Thermal expansion and Thermal stress: Problem Solving
To solve the problem, first, identify the known and unknown quantities. The initial length (L) of the bridge is 1275 m, the coefficient of linear expansion (α) for steel is 12 x 10-6/°C, and the change in...
Thermal Stress
Sight Distance in a Vertical Curve

