BTA Deep Hole Vibration Drilling for Nickel-Based Alloys: Cooling Patterns and Cutter Tooth Wear Mechanisms

The high cutting temperature and poor thermal diffusion efficiency of nickel-based alloys during deep hole machining have become technical challenges in the hole machining field. In this paper, a finite element simulation model of Inconel-718 BTA ordinary drilling and vibration drilling processes was established by using Deform-3D finite element simulation software. The variations in the temperatures of the tool teeth and the workpiece at different positions of the nickel-based alloy under ordinary drilling and vibration drilling were investigated. Additionally, the wear pattern of each tool tooth under the two drilling methods was further analyzed by building an experimental platform for workpiece temperature detection, which reveals the wear and cooling mechanism of nickel-based alloy BTA deep hole drilling. The results show that the average temperatures of the external, intermediate, and central teeth were reduced by 18.1%, 21.1%, and 17.8%, respectively, during vibration drilling. In addition, the workpiece hole wall and hole bottom temperatures were reduced by 5.7% and 4.6%, respectively. To conclude, the experimental tests were consistent with the simulated temperature trends. BTA vibration drilling optimizes the heat exchange conditions between the cutter teeth and the workpiece during the drilling of nickel-based alloys, which effectively reduces the cutting temperature and, thus, improves the wear resistance of the cutter teeth.