Related Experiment Video
Updated: Aug 19, 2025
Cerenkov Luminescence Imaging CLI for Cancer Therapy Monitoring
Published on: November 13, 2012
Enhanced Cherenkov imaging for real-time beam visualization by applying a novel carbon quantum dot sheeting in
Xing Di1, Changran Geng1,2, Chang Guo3
1Department of Nuclear Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing, People's Republic of China.
Background:
Cherenkov imaging can be used to visualize the placement of the beam directly on the patient's surface tissue and evaluate the accuracy of treatment planning. However, Cherenkov emission intensity is lower than ambient light. At present, time gating is the only way to realize Cherenkov imaging with ambient light.
Purpose:
This study proposes preparing a novel carbon quantum dot (cQD) sheeting to adjust the wavelength of Cherenkov emission to obtain the optimal wavelength meeting the sensitive detection region of the camera, meanwhile the total optical signal is also increased. By combining a specific filter, this approach might help in using lower-cost camera systems without intensifier-coupled to accomplish in vivo monitoring of the surface beam profile on patients with ambient light.
Methods:
The cQD sheetings were prepared by spin coating and UV curing with different concentrations. All experiments were performed on the Varian VitalBeam system and optical emission was captured using an electron multiplying charge-coupled device (EMCCD) camera. To quantify the optical characteristics and certify the improvement of light intensity as well as signal-to-noise ratio (SNR) of cQD sheeting, the first part of the study was carried out on solid water with 6 and 10 MV photon beams. The second part was carried out on an anthropomorphic phantom to explore the applicability of sheeting when using different radiotherapy materials and the imaging effect of sheeting with the impact of ambient light sources. Additionally, thanks to the narrow emission spectrum of the cQD, a band-pass filter was tested to reduce the effect from environmental lights.
Results:
The experimental results show that the optical intensity collected with sheeting has an excellent linear relationship (R2 > 0.99) with the dose for 6 and 10 MV photons. The full-width half maximum (FWHM) in x and y axis matched with the measured EBT film image, with accuracy in the range of ±1.2 and ±2.7 mm standard deviation, respectively. CQD sheeting can significantly improve the light intensity and SNR of optical images. Using 0.1 mg/ml sheeting as an example, the signal intensity is increased by 209%, and the SNR is increased by 147.71% at 6 MV photons. The imaging on the anthropomorphic phantom verified that cQD sheeting could be applied to different radiotherapy materials. The average optical intensity increased by about 69.25%, 63.72%, and 61.78%, respectively, after adding cQD sheeting to bolus, mask sample and the combination of bolus and mask. Corresponding SNR is improved by about 62.78%, 56.77%, and 68.80%, respectively. Through the sheeting, optical images with SNR > 5 can be obtained in the presence of ambient light and it can be improved through combining with a band-pass filter. When red ambient lights are on, the SNR is increased by about 98.85% after adding a specific filter.
Conclusion:
Through a combination of cQD sheeting and corresponding filter, light intensity and SNR of optical images can be increased significantly, and it shed new light on the promotion of the clinical application of optical imaging to visualize the beam in radiotherapy.
