S0 Lamb Mode Scattering Studies in Laminated Composite Plate Structures with Surface Breaking Cracks: Insights into...

Ultrasonic-guided waves are attractive for rapid inspection of laminated composite structures, where cracks developed transverse to the loading direction are the severe type of damage. This paper presents studies of the interaction of fundamental symmetric S0 Lamb mode with vertical surface-breaking cracks in laminated composite plate structures. Finite element simulations and experimental investigations are used to study the effect of crack depth on S0 wave reflection behavior. Results show a monotonic rise of the reflection coefficient for different crack depths in a manner that is strongly dependent on the orientation of the plies and transverse ply location in the vicinity of the crack. Scattered wave packets in the reflection regime are captured using an in-plane laser. The S0 Lamb mode's sensitivity is numerically presented for the different crack depths in the long wavelength limit. We also observed that the reflected wave mode depicts the information of the corresponding broken interfaces. An attempt was made to show that this behavior relates to the crack-opening behavior in response to in-plane excitation. The reflection coefficient as a characteristic polynomial is proposed for various orientations. It was observed that the dispersion at receiver nodes makes the analysis challenging for distinguishing the signal from crack faces due to the smaller dimension. The study outcomes show its prospect as a promising NDE tool for crack damage detection in thin laminated plate structures.