Related Experiment Video
Updated: Jun 21, 2026

Simple Methods for the Preparation of Non-noble Metal Bulk-electrodes for Electrocatalytic Applications
Published on: June 21, 2017
Designing High-Quality Electrocatalysts Based on CoO:MnO2@C Supported on Carbon Cloth Fibers as Bifunctional Air
Mohammad-Reza Zamani-Meymian1, Karim Khanmohammadi Chenab1,2, Hamed Pourzolfaghar1,3
1Department of Physics, Iran University of Science and Technology, Tehran16846-13114, Iran.
Abstract:
To achieve the requirements of rechargeable Zn-air batteries (ZABs), designing efficient, bifunctional, stable, and cost-effective electrocatalysts is vital for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), which still are struggling with unsolved challenges. The present research provides a concept based on the nanoscale composites which were engineered by using MnO2@C, CoO@C, and CoO:MnO2@C bifunctional electrocatalysts for fabrication of uniform carbon cloth (CC)-based electrodes. The CoO:MnO2@C electrocatalyst represented more efficient electrochemical properties through ORR and OER processes with superior positive half-wave potential (E1/2 = 0.78 V) and better limiting current density (i = 1.10 mA cm-2) in comparison with MnO2@C (E1/2 = 0.71 V, i = 0.92 mA cm-2) and CoO@C (E1/2 = 0.69 V, i = 0.86 mA cm-2) electrocatalysts. For the rechargeable ZABs fabricated by using CoO:MnO2@C-CC as an O2-breathing cathode, the specific capacity (SC), peak power density (P), open-circuit voltage (EOCV), and gap of charge/discharge voltage resulted in values of 520 mAh gZn-1, 210.0 mW cm-2, and 1.45 and 0.45 V, respectively, that afforded greater electrochemical characters than what was obtained for ZABs based on MnO2@C-CC (410 mAh gZn-1, 195.0 mW cm-2, 1.38 and 0.44 V) and CoO@C-CC (440 mAh gZn-1, 165.0 mW cm-2, 1.15 and 0.54 V). At the same time, lower E (= 1.45 V) implied a more efficient OER in alkaline electrolyte solution for CoO:MnO2@C than MnO2@C (E = 1.50 V) and CoO@C (E = 1.39 V). Based on cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), linear sweep voltammetry (LSV), and X-ray photoelectron spectroscopy (XPS) results, it could be stated that the CoO:MnO2@C catalytic surface could experience 30 and 32% lower charge transfer resistance (Rct = 13.9 Ω) than MnO2@C (Rct = 20.1 Ω) and CoO@C (Rct = 29.7 Ω), respectively, which empowers an enhancement in ORR/OER performance. Prominently, the design concept of proposed electrocatalysts could suggest clear horizon for the synthesis and development paradigms of bifunctional catalysts for energy storage materials and devices.
More Related Videos
10:57Synthesis and Performance Characterizations of Transition Metal Single Atom Catalyst for Electrochemical CO2 Reduction
Published on: April 10, 2018
08:40Synthesis of Metal Nanoparticles Supported on Carbon Nanotube with Doped Co and N Atoms and its Catalytic Applications in Hydrogen Production
Published on: December 6, 2021