Related Experiment Video
Updated: Aug 18, 2025
Morphology Control for Fully Printable Organic–Inorganic Bulk-heterojunction Solar Cells Based on a Ti-alkoxide and Semiconducting Polymer
Published on: January 10, 2017
Morphology Optimization of the Photoactive Layer through Crystallinity and Miscibility Regulation for
Hang Yang1, Sunan Bao1, Naizhe Cui1
1Laboratory of Advanced Optoelectronic Materials, Suzhou Key Laboratory of Novel Semiconductor-Optoelectronics Materials and Devices, College of Chemistry Chemical Engineering and Materials Science, Soochow University, Suzhou, 215123, China.
Abstract:
On the premise of strongly crystalline materials involved, it is a challenge to control the phase separation of bulk-heterojunction donor/acceptor active layer to fabricate high-performance polymer solar cells (PSCs). Herein, we develop a molecular design strategy of the third component to synthesize three guest materials (namely BTPT, BTP-Th, and BTP-2Th) to address this issue. We investigate and reveal the effect of crystallinity and miscibility of the third component in controlling the phase separation of Y6-derivatives-based blend film. As a result, a remarkable power-conversion efficiency of 18.53 % is obtained in the ternary PSC based on PTQ10 : m-BTP-PhC6 with BTP-Th as the third component, which is a significant improvement with regard to the efficiency of 17.22 % for the control binary device. Our study offers a molecular design strategy to develop a third component for building ternary PSCs in terms of crystallinity and miscibility regulation.
More Related Videos
07:32Printing Fabrication of Bulk Heterojunction Solar Cells and In Situ Morphology Characterization
Published on: January 29, 2017
06:49In situ Grazing Incidence Small Angle X-ray Scattering on Roll-To-Roll Coating of Organic Solar Cells with Laboratory X-ray Instrumentation
Published on: March 2, 2021
