The impact of temporal synchronisation imprecision on TRF analyses

The Fourier series is a powerful mathematical tool for representing periodic signals as an infinite sum of complex exponentials. In practice, this infinite series is truncated to a finite number of terms, yielding a partial sum. This truncation makes the approximation of the signal feasible but introduces certain challenges, particularly near discontinuities, known as the Gibbs phenomenon.
The Gibbs phenomenon refers to the persistent oscillations and overshoots that occur near discontinuities...

Accurate signal sampling and reconstruction are crucial in various signal-processing applications. A time-domain signal's spectrum can be revealed using its Fourier transform. When this signal is sampled at a specific frequency, it results in multiple scaled replicas of the original spectrum in the frequency domain. The spacing of these replicas is determined by the sampling frequency.
If the sampling frequency is below the Nyquist rate, these replicas overlap, preventing the original...

The Discrete-Time Fourier Series (DTFS) is a fundamental concept in signal processing, serving as the discrete-time counterpart to the continuous-time Fourier series. It allows for the representation and analysis of discrete-time periodic signals in terms of their frequency components. Unlike its continuous counterpart, which utilizes integrals, the calculation of DTFS expansion coefficients involves summations due to the discrete nature of the signal.
For a discrete-time periodic signal x[n]...

In signal processing, Discrete-Time Fourier Transforms (DTFTs) play a critical role in analyzing discrete-time signals in the frequency domain. Various properties of the DTFTs such as linearity, time-shifting, frequency-shifting, time reversal, conjugation, and time scaling help understand and manipulate these signals for different applications.
The linearity property of DTFTs is fundamental. If two discrete-time signals are multiplied by constants a and b respectively, and then combined to...

Phase-lag controllers are widely used in control systems to improve stability and reduce steady-state errors. A dimmer switch controlling the brightness of a light bulb serves as a practical example of phase-lag control, gradually adjusting the bulb's brightness. Mathematically, phase-lag control or low-pass filtering is represented when the factor 'a' is less than 1.
Phase-lag controllers do not place a pole at zero, but instead influence the steady-state error by amplifying any...